木根麦冬的种群数量动态

运用静态生命表、生殖力表和Leslie矩阵模型，研究了木根麦冬种群数量动态过程，揭示了种群各龄级植株的动态规律，结果表明，木根麦冬种群为衰退型种群，种群的净增殖率、内禀增长率和周限增长率较低，种群世代周期偏长，种群不能自我更新，在20a内种群幼苗数量和总数量将持续快速下降，木根麦冬种群在16-20a年龄段受到了环境筛的强烈过滤作用。     

The role of periodic boundary forcing in plankton pattern formation

We consider one and two-dimensional minimal models in plankton dynamics. The influence of oscillating boundary forcing functions as agents for triggering pattern formation is discussed. In particular it is found that in these conditions population waves arise for one dimensional models, while for two dimensional models, different amplitudes and frequencies in the boundary forcing generate definite patterns, mimicking the boundary term. This happens even though the model we investigate is very simple. The emergence of these features is an interesting metaphor for the fundamental biological problem of how pattern formation processes may be inevitable in natural heterogeneous ecosystems.     

Ecological effects of cultivation on the machair sand dune systems of the Outer Hebrides, Scotland

The machair sand dune systems of the Outer Hebrides of Scotland are a unique habitat, which is rare within both a global and European context. Unusually, the machair habitat also represents an agricultural resource that is very important to the Hebridean people, having been subject to both grazing and cultivation throughout the historical period. Following designation as an Environmentally Sensitive Area (ESA) in 1988, the machairs of South Uist have been studied with the aim of understanding the links between agricultural practice and their plant community and ecosystem dynamics. This research focused primarily on the effects of cultivation practices and their role in maintaining plant species richness and community and ecosystem stability. Within two carefully selected areas, the successional plant communities of machair at different stages of recovery following ploughing and cultivation of cereals and potato patches or ‘lazy beds’ were identified at both a macro- and micro-level. Investigations of the vegetation recovery processes on turves taken from newly ploughed land indicated that the initial stages of recolonization are characterized primarily by rapid vegetative reproduction and growth, although re-vegetation by seeds is also an important factor. The implications of these findings for the long-term management of machair plant communities are discussed and in particular the need to maintain old cultivation practices such as shallow ploughing. The need for more detailed research into both seed banks and seed rain and into processes of vegetative reproduction is stressed. Nomenclature: Clapham et al. (1981) and Stace (1991, 1997) for vascular plants; Hubbard (1984) for grasses; Pankhurst & Mullin (1991) for the regional flora; Dobson (1992) for lichens; Watson (1981) for mosses and liverworts.     

Small mammals as indicators of short-term and long-term disturbance in mixed prairie

Disturbance by military maneuvers over short and long time scales may have differential effects on grassland communities. We assessed small mammals as indicators of disturbance by military maneuvers in a mixed prairie in southern Oklahoma USA. We examined sites on two soil series, Foard and Lawton, across a gradient of disturbance intensity. A MANOVA showed that abundance of small mammals was associated (p = 0.03) with short-term (cover of vehicle tracks) disturbance but was not associated (p = 0.12) with long-term (loss of soil organic carbon, SOC) disturbance intensity. At the individual species level, Sigmodon hispidus (cotton rat) and Peromyscus maniculatus (deer mouse) occurred across all levels of disturbance and in both soil types. Only P. maniculatus abundance changed (p < 0.01) with short-term disturbance and increased by about one individual per 5% of additional track-cover. Abundance of P. maniculatus also increased (p = 0.04) by about three individuals per 1% increase in soil carbon. Chaetodipus hispidus (hispid pocket mouse) and Reithrodontomys fulvescens (fulvous harvest mouse) only occurred in single soil types limiting their potential as more general indicators. Abundance of P. maniculatus was positively related to shifts in plant species composition and likely reflected changes in vegetation structure (i.e. litter depth) and forage availability resulting from disturbance. Peromyscus maniculatus may be a useful biological indicator of ecosystem change because it responded predictably to both long-term and short-term disturbance and, when coupled with soil, plant, and disturbance history variables, can reveal land condition trends.     

Influence of Building Density and Roof Shape on the Wind and Dispersion Characteristics in an Urban Area: A Numerical Study

The Computational Fluid Dynamics code CFX-TASCflow is used for simulating the wind flow and pollutant concentration patterns in two-dimensional wind-tunnel models of an urban area. Several two-dimensional multiple street canyon configurations are studied corresponding to different areal densities and roof shapes. A line source of a tracer gas is placed at the bottom of one street canyon for modelling street-level traffic emissions. The flow fields resulting from the simulations correspond to the patterns observed in street canyons. In particular and in good agreement with observations, a dual vortex system is predicted for a deep flat-roof street canyon configuration, while an even more complex vortex system is evidenced in the case of slanted-roof square street canyons. In agreement with measurement data, high pollutant concentration levels are predicted either on the leeward or the windward side of the street canyon, depending on the geometrical details of the surrounding buildings.     

地下水环境中甲基叔丁基醚运移过程的动力学模型

建立了地下水环境中甲基叔丁基醚(MTBE)运移过程的变系数动力学模型,并对模型进行了验证和参数灵敏度分析.模拟结果表明,地下水流速和阻滞系数对于MTBE的运移过程影响最为显著,而水动力弥散系数的影响较小,忽略其变化不会对预测地下水环境中污染物运移的环境动力学行为造成太大误差.由此得到的结论可定量研究MTBE在地下水环境中的对流.扩散特征,还可为MTBE污染地下水的预测预报、修复治理等研究提供科学依据.     

Blast wave clearing behavior for positive and negative phases

The purpose of the research was to improve prediction of response of buildings to blast waves by including the negative phase and considering clearing of both positive and negative phases. Commonly used structural design practices, which trace their origins to military design manuals, often ignore the negative phase as well as positive phase clearing. For high explosive threats, this approach is conservative in most circumstances. However, negative phase clearing had not previously been studied for blast waves, and the implications for structural response had not been evaluated. This paper presents results of modeling negative phase blast clearing behavior for a typical blast wave and discusses the differences from positive phase clearing. The implications of including positive and negative phase clearing in building blast damage analysis are also investigated through single-degree-of-freedom (SDOF) analyses.Blast waves from explosion sources like a vapor cloud explosion (VCE), pressure vessel burst or high explosive exhibit both positive and negative phases, and the relative magnitude of the positive and negative phases varies among explosion sources and the specific circumstances of each source. A fully reflected blast wave is produced if an incident blast wave were to strike an infinitely tall and wide wall in a normal orientation. Both the positive and negative phases of the blast wave are enhanced by the reflection process. However, when an incident blast wave strikes a wall of finite size in a normal orientation, rarefaction waves are created at the edges of the wall, and the rarefactions sweep down from the roof and inward from sides. The rarefaction waves result in a clearing effect for both the positive and negative phases.Clearing relieves some of the applied blast load on the reflected wall for the positive phase. However, this is not always the case for the negative phase. As shown by the results presented in this paper, clearing may either relieve or enhance the applied negative phase blast load, depending on the duration of the blast wave and the wall dimensions.The impact of negative phase clearing on structural response for generic building components was also investigated. Nonlinear SDOF methods were used to characterize response in terms of peak positive and negative displacements. It was found that the influence of the negative phase is significant and the peak structural response can occur during negative (outward) displacement.     

高速公路安全水平仿真分析

为深入研究高速公路安全系统,用系统动力学(SD)方法分析驾驶员、车辆、道路、应急救援等组成要素以及环境、管理等影响因素之间的关系,建立高速公路安全系统因果关系模型和存量流量模型。用层次分析法(AHP)确定各影响因素的权重。以三福高速公路为例,用Vensim软件模拟高速公路运营期间系统安全的变化情况。结果表明,在该高速公路运营期间,系统安全与车辆安全度呈先上升后下降的趋势、道路安全度呈下降趋势、驾驶员安全度与应急救援能力呈上升趋势。通过与实际数据对比,验证了模型的有效性。     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.